APPENDIX G -- PRO-LINK 9000 DIAGNOSTIC DATA READER INFORMATION

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL

APPENDIX G -- PRO-LINK 9000 DIAGNOSTIC DATA READER INFORMATION

Pro-link 9000 Diagnostic Tools

The WTEC III system will require new Pro-Link 9000 hardware for reprogramming and diagnostics. The

following is a list of required updates to the current Pro-Link 9000 hardware:

Hardware

Tool P/N

Diagnostic Cartridge

J38500-303

PROM Update Kit

J38500-313

MultiProtocol Cartridge (MPC)

J38500-1500A

Reprogramming PCMCIA Card*

J38500-1700

Diagnostic Card*

J38500-1800

* Requires J38500-1500A to function

Limited diagnostic information for the WTEC III system can be accessed through the current WTEC II

Pro-Link 9000 hardware. This diagnostic information will however be limited to that information that is common

to the WTEC II and WTEC III systems. Access to information described in this SIL can only be accessed through

either the WTEC III Diagnostic Cartridge or by updating the current WTEC II Diagnostic Cartridge with the

PROM update kit or the WTEC III Reprogramming Cartridge.

The MultiProtocol Cartridge (MPC) and the Reprogramming Card are required to modify customer constants and

alter Calibration packages within the WTEC III ECU. After completing an ATD-approved training class, those

ordering a reprogramming cartridge are required to submit a copy of their completion certificate with their order.

This serves as proof of eligibility to purchase these items. Training is available from ATD and ATD distributors.