INTERMEDIATE AND REAR AXLE DRIVELINE ASSEMBLIES TROUBLESHOOTING

TM 9-2320-303-24-1

INTERMEDIATE AND REAR AXLE DRIVELINE ASSEMBLIES TROUBLESHOOTING

0011 00

THIS WORK PACKAGE COVERS

Intermediate and Rear Axle Driveline Troubleshooting Procedures

INITIAL SETUP

Maintenance Level

Tools and Special Tools

Unit

Tool kit, general mechanic's (Item 102, WP 0313

00)

Table 1. Intermediate and Rear Axle Driveline Assemblies Troubleshooting Procedures.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

No Drive At Forward-Rear Axle And/or 1. Check propeller shaft and 1. Replace

any

defective

Rear-rear Axle.

universal joints from transfer

universal joint(s) (WP 0117

rear output to forward-rear axle

00).

for broken universal joint(s) 2. Replace defective propeller

and broken or damaged tube,

shaft (WP 0116 00).

splines, or yoke(s).

2. Check propeller shaft and 1. Replace

any

defective

universal joints from forward-

universal joint(s) (WP 0117

rear axle to rear-rear axle for

00).

broken universal joint(s) and 2. Replace defective propeller

broken or damaged tubes,

shaft (WP 0116 00).

splines, or yoke(s).

3. Check forward-rear axle and Replace any broken axle shaft(s)

rear-rear axle for broken axle (WP 0116 00).

shaft(s).

4. If problem still exists, notify

direct support maintenance.

Vibration Or

Noise

During

On-road 1. Check propeller shafts and 1. Replace

any

defective

Operation.

universal joints for obvious

universal joint(s) (WP 0117

wear or damage.

00).

2. Replace defective propeller

shaft (WP 0116 00).

2. Check wheels for looseness 1. Tighten any loose wheel lug

and obvious damage.

nuts (WP 0153 00).

2. Replace

any

damaged

wheel(s).

END OF WORK PACKAGE

0011 00-1/0011 00-2 blank)