 |
|||
|
|
|||
|
Page Title:
M13 DECONTAMINATION KIT MOUNTING BRACKET REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
M13 DECONTAMINATION KIT MOUNTING BRACKET REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts
Tool kit, general mechanic's (Item 50, WP 0306 00)
Nut, self-locking (P/N M45913/1-5CBB) (2)
Wrench, torque, 15-75 lb-ft (Item 57, WP 0306 00)
REMOVAL
NOTE
Although mounted in different location for M917s, mounting bracket is replaced the same way. M915 is
illustrated.
1.
Open door of personal gear storage box (3).
2.
Remove four self-locking nuts (1), eight washers (2), four cap screws (5), and M13 decontamination kit mounting
bracket (4) from side of personal gear storage box (3). Discard self-locking nuts.
3
2
1
4
2
5
INSTALLATION
1.
Install M13 decontamination kit mounting bracket (4) on side of personal gear storage box (3) with four cap screws (5),
eight washers (2), and four new self-locking nuts (1).
2.
Tighten four self-locking nuts (1) to 22 lb-ft (30 Nm).
3.
Close door of personal gear storage box (3).
END OF WORK PACKAGE
0297 00-1/(-2 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals