 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
FRONT BUMPER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Two
Tool kit, general mechanic's (Item 50, WP 0306 00)
Equipment Condition
Wrench, torque, 50-250 lb-ft (Item 58, WP 0306 00)
Collision warning system (CWS) antenna assembly
Materials/Parts
removed (M915A3, M916A3) (WP 0140 00)
Nut, lock (P/N M45913/1-6CG5C) (2)
Engine hood assembly removed (WP 0242 00)
REMOVAL
1.
Remove two locknuts (4), four washers (7), two bolts (6), and bracket (5) from front bumper (1). Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
2.
Attach suitable lifting device to front bumper (1) using bumper extensions (3) as attaching points.
3.
Remove lock pin (10). Unscrew threaded bolt (8) and remove hook (9) from each tow bracket (2).
1
2
10
4
3
7
5
8
9
1
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals