FRONT AND DUAL REAR WHEEL LUG NUT INSTALLATION

TM 9-2320-302-20-2

FRONT AND DUAL REAR WHEEL LUG NUT INSTALLATION

0206 00

THIS WORK PACKAGE COVERS

Front Wheel Lug Nuts Installation, Rear Wheel Lug Nuts Installation

INITIAL SETUP

Tools and Special Tools

Tool kit, general mechanic's (Item 50, WP 0306 00)

Wrench, torque, 100-600 lb-ft (Item 59, WP 0306 00)

Wrench set, socket, 3/4 in drive (Item 60, WP 0306

FRONT WHEEL LUG NUTS INSTALLATION

WARNING

Whenever any lug nuts require tightening or a wheel has been removed and replaced, all lug nuts must be

tightened to the required torque. Failure to follow this warning may result in serious injury to personnel or

damage to equipment.

NOTE

Tightening pattern is the same for all wheel assemblies.

After operating vehicle for 50-100 miles (80 to 160 km), tighten lug nuts again.

Install lug nut on each wheel stud and hand tighten until each lug nut is flush with face of chamfer on wheel.

Rotate wheel half a turn to seat parts and hand tighten each wheel lug nut again.

Tighten each lug nut to 50 lb-ft (68 Nm) in accordance with tightening pattern.

TIGHTENING PATTERN

0206 00-1