 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
PRIMARY I AND AIR SUPPLY TANK AND FITTINGS REPLACEMENT (M917A2) - CONTINUED
0187 00
INSTALLATION
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harm-
ful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive or sealing compound contacts skin or clothing, wash immediately
with soap and water.
Ensure that all air lines and fittings are clear of debris and excess pipe sealing compound does
not enter air lines or fittings. Failure to follow this warning could result in injury to personnel
and damage to equipment.
1.
Install bracket (6) on frame (10) with four bolts (4), eight washers (5), and four nuts (3).
2.
Install air tank (7) on bracket (5) and tighten two nuts (8).
3.
Install auto drain valve (WP 0171 00).
4.
Coat threads of two adapters, two elbows, and two plugs with pipe sealing compound.
5.
Install two plugs (8) on air tank (7).
6.
Install two adapters (2) on air tank (7).
NOTE
R/H tank has two tubes (1) and two elbows (11).
7.
Install two elbows (11) on two adapters (2).
8.
Connect four air tubes (1).
9.
Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.
END OF WORK PACKAGE
0187 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals