INSTALLATION - TM-9-2320-302-20-20629

TM 9-2320-302-20-2

SECONDARY AIR TANK AND FITTINGS REPLACEMENT - CONTINUED

0185 00

INSTALLATION

WARNINGS

Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin

and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If

adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.

Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air

lines or fittings. Failure to follow this warning could result in injury to personnel and damage to equip-

ment.

For M915A3 New Model, M916A3, and M917A2, install auto drain valve (WP 0171 00).

Coat pipe threads of drain valve (27), pressure protect valve (28), bushing (24), tee (30), connector (29), plug (25),

check valve (26), and four elbows (23) with pipe sealing compound.

Install drain valve (27), pressure protect valve (28), bushing (24), tee (30), connector (29), plug (25), check valve (26)

and four elbows (23) in air tank (3).

Install two brackets (14) with two washers (19), screws (18), washers (13), and new locknuts (12).

Install two mounting brackets (15), clamps (11), washers (10), and new locknuts (9).

Install two brackets (8), washers (6), and new locknuts (5).

Install cable (22), two washers (7), screws (4), washers (21), and new locknuts (20).

Install air tank (3) with two screws (17), and new locknuts (16).

Connect hose (2) and four tubes (1) to air tank (3).

10.

Start vehicle and build air pressure (TM 9-2320-302-10). Check for leaks.

END OF WORK PACKAGE

0185 00-3/(-4 Blank)