 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
ANTI-LOCK BRAKE SYSTEM (ABS) FLOOR WIRING HARNESS REPLACEMENT
(M915A3 NEW MODEL, M916A3, M917A2) - CONTINUED
0128 00
REMOVAL - CONTINUED
8.
Tie a suitable lacing wire or rope to ABS floor wiring harness (7). Remove wiring harness from vehicle by pulling har-
ness rearward through transmission access tunnel (11). DO NOT remove lacing wire or rope from tunnel.
9.
As required, remove conduit from ABS floor wiring harness (7).
INSTALLATION
NOTE
Install new tiedown straps and electrical tape as necessary.
1.
If removed, install conduit to ABS floor wiring harness (7).
2.
Position ABS floor wiring harness (7) between points of connection.
3.
Tie lacing wire or rope to ABS floor wiring harness (7). Pull wiring harness forward through transmission access tunnel
(11).
4.
Route ABS floor wiring harness (7) upward toward connection points.
5.
Connect two ABS floor wiring harness connectors (13) to wiring harness connectors (12).
6.
Install access cover (10) with three screws (9).
10
9
0128 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals