|
|
TM 9-2320-302-20-2
CLEARANCE LIGHT REPLACEMENT (M915A3 OLD MODEL)
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Tool kit, general mechanic's (Item 50, WP 0306 00)
Head liners removed (WP 0264 00)
Master battery switch in OFF position (TM 9-2320-
302-10)
NOTE
Five clearance lights are replaced the same way. One clearance light is shown.
REMOVAL
1.
Remove lens cover (1), lamp (2), two screws (9), and washers (8) from clearance light (3).
2.
Remove clearance light (3).
3.
Disconnect connector (6) and pull harness (5) through hole in cab (7).
4.
Remove grommet (4) from cab (7).
1
2
9
3
8
4
5
7
6
INSTALLATION
1.
Install grommet (4) on cab (7).
2.
Feed harness (5) through hole in cab (7).
3.
Connect connector (6).
4.
Install clearance light (3), two washers (8), screws (9), lamp (2), and lens cover (1).
5.
Install head liners (WP 0264 00).
END OF WORK PACKAGE
0105 00-1/(-2 Blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |