 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
RADIATOR REPLACEMENT - CONTINUED
0052 00
REMOVAL - CONTINUED
1.
Remove two nuts (11), four washers (4), and two screws (5) from two side shields (8).
2.
Loosen four clamps (1) and remove two hoses (6) from charge air cooler (14) and air intake tubes (7).
CAUTION
Secure charge air cooler in position before performing steps 3 and 4. Failure to follow this caution will result
in damage to equipment.
3.
Remove two locknuts (10), screws (12), and washers (13) from charge air cooler (14). Discard locknuts.
4.
Remove two nuts (2), washers (3), and charge air cooler with condenser (14) from radiator (9).
7
1
14
6
5
2
4
3
10
1
8
9
13
10
12
4
11
5.
Remove four screws (33), washers (32), and fan shroud (31) from radiator (16).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
6.
Using suitable lifting device, support radiator (16).
7.
Remove two locknuts (25), washers (24), and isolators (23) from screws (20). Discard locknuts.
8.
Remove locknut (18) and ground cable (19) from radiator (16). Discard locknut.
0052 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals