 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
EXHAUST SYSTEM FLEX PIPE, CLAMPS, AND HEAT SHIELD REPLACEMENT - CONTINUED
0045 00
REMOVAL - CONTINUED
2.
Loosen coupling clamp (13) holding exhaust pipe (12) to turbocharger.
3.
Loosen seal clamp (11) and remove exhaust pipe (12), coupling clamp (13), and seal clamp from exhaust hose (10). Dis-
card seal clamp.
4.
Loosen seal clamp (9) and remove exhaust hose (19) and seal clamp from exhaust pipe (8). Discard seal clamp.
5.
Remove four nuts (16) and two saddle clamps (14) holding exhaust pipe (8) to two hanger brackets (15).
6.
Loosen seal clamp (7) and remove exhaust pipe (8) and seal clamp from exhaust hose (4). Discard seal clamp.
NOTE
Perform step 7 if hanger brackets are damaged.
7.
Remove two locknuts (17), four washers (6), two screws (5), and two hanger brackets (15) from frame rail. Discard
locknuts.
8.
Remove remaining components of exhaust system from vehicle as an assembly.
9.
Loosen seal clamp (3) and remove exhaust hose (4) and seal clamp from exhaust elbow (2). Discard seal clamp.
NOTE
Note position of heat shields for installation.
10.
Loosen hose clamp of heat shield (1) and remove heat shield from exhaust elbow (2).
11.
Loosen hose clamp of heat shield (20) and remove heat shield from exhaust elbow (19).
12.
Loosen seal clamp (18) and separate exhaust elbow (19), seal clamp, and exhaust elbow (2). Discard seal clamp.
13
12
11
10
9
8
7
6
5
4
3
2
14
1
18
15
16
17
19
20
0045 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals