 |
|||
|
|
|||
|
Page Title:
AIR COMPRESSOR DISCHARGE HOSE REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
AIR COMPRESSOR DISCHARGE HOSE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
Tool kit, general mechanic's (Item 50, WP 0306 00)
TM 9-2320-302-10
Materials/Parts
Equipment Condition
Nut, lock (P/N M45913/1-4CG5C)
Air system drained (TM 9-2320-302-10)
Transmission tunnel access cover removed (WP 0268
REMOVAL
1.
Remove discharge hose (2) from air compressor elbow fitting (1).
2.
Remove locknut (15), screw (4), two washers (3), and clamp (17) from mounting bracket (16). Discard locknut.
3.
Remove screw (14), washer (13), and mounting bracket (16) from engine block (5).
4.
Remove nut (10), washer (11), and two hose clamps (7 and 12) from standoff bracket (6).
5.
Reinstall hose clamp (12) on standoff bracket (6) with washer (11) and nut (10).
4
1
5
2
3
8
17
6
16
7
3
13
15
2
9
12
14
11
10
342-241
NOTE
Discharge hose from compressor to air dryer is routed in a continuous downward slope to prevent collection
of moisture in line. Hose clamps, secured to standoff mounting brackets at 12-20 in (30-51 cm) intervals, are
used to secure compressor discharge hose and other hoses in place. Replace damaged standoff bracket as
required.
6.
Remove discharge hose (2) and inline fitting (8) from air dryer hose (9).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals