 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-302-20-2
ENGINE OIL FILTERS MAINTENANCE (M915A3 NEW MODEL, M916A3, M917A2) - CONTINUED
0027 00
ELEMENT REMOVAL
NOTE
Perform step 1 if engine is not already warm.
1.
Operate engine until coolant temperature gage registers 140F (60C). Shut down engine (TM 9-2320-302-10).
NOTE
Perform steps 2 through 6 for each of two engine oil filters.
2.
Remove either of two drain plugs (1) from oil filter bottom cap (3) and allow oil inside oil filter housing (2) to drain.
1
2
3
3.
Remove bottom cap (3) assembly and filter element (9) from filter housing (2).
4.
Remove plastic retainer (4), spring (5), and two o-rings (6 and 7) from bottom cap (3).
5.
Remove o-ring (8) from drain plug (1).
6.
Inspect filter element (9), spring (5), o-ring (8), and two o-rings (6 and 7) for damage. Replace if damaged.
0027 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals