 |
|||
|
|
|||
|
Page Title:
Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for the M915 Family of Vehicles - Continued |
|
||
| ||||||||||
|
|
 TM 9-2320-302-20-2
Table 1. Unit Preventive Maintenance Checks and Services (PMCS)
for the M915 Family of Vehicles - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL HOURS
SERVICE
PROCEDURE
CAPABLE IF:
Remove, clean, inspect, pack,
49
Annual
Front and Rear
install, and adjust wheel bearings.
Wheels,
Wheel Bearings
Check brakeshoe linings for a min-
50
Annual
Front and Rear
imum thickness of 1/4 in (6.5
Wheels,
mm). Replace worn or damaged
Brakeshoe
brakeshoes.
Linings
51
Annual
Front Axle,
Check front axle stop cushions for
wear or deterioration.
Stop Cushions
52
Annual
0.2
Front Axle
a. Position vehicle so that fill hole
plugs (24) are at 6 and 12
Wheel End,
o'clock positions.
Lubrication
(M916A3 and
b. Remove top and bottom fill hole
M917A2)
plugs (24) and drain oil into
suitable container.
c. Clean, install, and tighten hole
plug (24) at 6 o'clock position
to 18-25 lb.
d. Remove level control plug (25)
and seal.
e. Add oil (Items 26 through 28,
plug (24) at 12 o'clock position
until oil is level with bottom of
level control hole.
f. Clean, install, and tighten seal
and level control plug (25) to 8
ft-lb.
g. Clean, install, and tighten top
fill hole plug (24) at 12 o'clock
position to 18-25 lb-ft.
24
25
24
0023 00-30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals