Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for the M915 Family of Vehicles - Continued

TM 9-2320-302-20-2

Table 1. Unit Preventive Maintenance Checks and Services (PMCS)

for the M915 Family of Vehicles - Continued.

LOCATION

ITEM TO

ITEM

MAN-

CHECK/

NOT FULLY MISSION

NO.

INTERVAL HOURS

SERVICE

PROCEDURE

CAPABLE IF:

10,000 Miles 0.6

Front Axle,

a. Remove drain plug (41) and

drain fluid into a suitable con-

or Annual

Transfer Case

tainer. Clean drain plug. Check

(M916A3 and

for metal particles in oil. Notify

M917A2)

Direct Support Maintenance if

this condition exists.

b. Install and tighten drain plug

(41) to 35-50lb-ft (47-68 Nm).

c. Clean area around oil fill/level

plug (28). Remove and clean

plug.

d. Add OE/HDO or OEA (Item 21

or 25, WP 0305 00) until oil

level is even with bottom of fill

plug hole (30).

e. Install and tighten oil fill/level

plug (30) to 35-50 lb-ft (47-68

Nm).

f. Remove and check for clogged

breather (44). If clogged,

replace breather (WP 0164 00).

g. Start vehicle, engage transfer

case, and drive vehicle 1/4 mile

(0.4 km).

h. Recheck fluid level.

i. Reinstall and tighten oil fill/

level plug to 35-50 lb-ft (47-68

Nm).

0023 00-29