|
| |
TM 9-2320-270-10
Troubleshooting – Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ONE OR BOTH WINCHES WILL NOT OPERATE – CONTINUED
Step 3. Check position of the throttle release safety switch (1) and engine throttle
control (2).
a.
b.
Move throttle release safety switch (1) rearward to ON
position.
Pull engine throttle control (2) as far back as it will go
(toward cab).
Step 4. Check hydraulic reservoir fluid level.
a. If hydraulic reservoir fluid level is not at the FULL mark on
dipstick (3), fill reservoir (see LO 9-2320-270-12).
3-40
b. If winches still do not operate, notify Organizational
Maintenance.
TA220937
|
