|
| |
TM 9-2320-270-10
Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WINCHES
ONE OR BOTH WINCHES WILL NOT OPERATE
Step 1. Check position of PTO CONTROL (3), auxiliary transmission selector
lever (4), and main transmission selector lever (5).
a. Place PTO CONTROL (3) in ENGAGE position while
auxiliary and main transmission selector levers (4) and (5)
are in neutral (N).
b. Place main transmission selector lever (5) in D position.
Leave auxiliary transmission selector lever (4) in neutral.
Step 2. Check PTO/AUX THROTTLE INDICATOR LIGHT (6).
If PTO/AUX THROTTLE INDICATOR LIGHT (6) does not
come on, notify Organizational Maintenance.
3-39
|
