Securing Winch Cable After Winching Operation Continued 3. Direct crew member to signal when enough slack has been taken up to prevent cable from unwinding over the drum flanges (1) when attached to anchor (2). 4. Stop winch and direct crew member to bolt cable clevis (3) to anchor (2). Normal Winch Shutdown 1. 2. 3. Push engine throttle control (4) fully forward (away from cab) to reduce engine rpm. Have M911 Truck Tractor operator move PTO control (5) to DISENGAGE position. Move throttle release safety switch (6) to OFF position. 4. Have M911 is off. Truck Tractor operator verify that PTO/AUXiliary throttle indicator light (7) 2-98

TM 9-2320-270-10 OPERATING WINCHES – CONTINUED Securing Winch Cable After Winching Operation – Continued 3. Direct crew member to signal when enough slack has been taken up to prevent cable from unwinding over the drum flanges (1) when attached to anchor (2). 4. Stop winch and direct crew member to bolt cable clevis (3) to anchor (2). Normal Winch Shutdown 1. 2. 3. Push engine throttle control (4) fully forward (away from cab) to reduce engine rpm. Have M911 Truck Tractor operator move PTO control (5) to DISENGAGE position. Move throttle release safety switch (6) to OFF position. 4. Have M911 is off. Truck Tractor operator verify that PTO/AUXiliary throttle indicator light (7) 2-98