|
| |
TM 9-2320-270-10
PARKING
1.
2.
3.
4.
WARNING
Do not park the M911 Truck Tractor on a steep grade. If a parked M911 Truck
Tractor breaks away, it could cause injury to personnel and damage to equipment.
If the truck tractor must be parked on a grade, the wheels must be chocked and if
on a paved road, the wheels must be turned toward curb if facing down hill and
away from the curb if facing uphill.
Stop M911 Truck Tractor.
Apply PARKING BRAKE (l).
Remove ignition key (2).
Lock cab doors.
FIFTH WHEEL
The M911 Truck Tractor has a heavy-duty, full oscillating (4 way tilt) fifth wheel (3) that will
accept and lock a 3½ inch (8.9 cm) diameter kingpin. It also has a manual secondary lock
release, and side-to-side oscillation lockouts (4).
NOTE
Be sure side-to-side oscillation lockouts (4) are positioned to give the type of
oscillation needad for your mission - 4 way for off-road, and front and rear
oscillation for highway driving.
For full oscillation (4 way tilt), oscillator lockouts (4) should be positioned fully outward on
both sides.
For front and rear oscillation only, oscillator lockouts (4) should be positioned fully inward on
both sides.
TA220855
2-82
|
