|
|
TM 55-1740-200-14
a. Place jack under axle and raise the tractor until the
b. Remove tube (3) from engine block and remove
tire just clears ground.
gasket (4) from tube.
b. Remove six nuts and rim clamps and remove tire
3-98. REPAIR. Wash tube in drycleaning solvent (item
and wheel assembly.
18, table 1-3). Inspect bolt for damaged threads.
3-102. REPLACEMENT. Install tire and wheel assembly
as follows:
3-99. REPLACEMENT. Replace components as follows:
a. With tractor jacked up, mount tire and wheel
a. Install new gasket (4) on tube (3).
assembly.
Secure tube (3) to engine with washer (2) and bolt
Care shall be taken to prevent thread damage
3-100. TIRE AND WHEEL ASSEMBLY.
and keep rim clamps in position while
tightening nuts.
b. Install six nuts and rim clamps.
Tractor weight is 10,700 pounds. Use proper
capacity jack.
Tighten nuts alternately.
3-101. REMOVAL. Set the parking brake and remove
c. Lower tractor and remove jack.
the tire and wheel assembly as follows:
3-25/(326 blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |