|
|
TM 5-2420-224-34
TORQUE SEQUENCE
If the maintenance procedures do not specify a tightening order, use the following guides:
Unless otherwise specified, lubricate threads of fasteners with oil (OE/HDO-10 or OEA).
When tightening fasteners above 30 Ib-ft (41 N.m), use the torque pattern but only tighten
to 70 percent of final value (multiply final value by 0.7); then repeat the pattern until final
value is reached.
Tighten circular patterns using the circular torque pattern, and straight patterns using the
straight torque pattern.
D-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |