BACKHOE CONTROL VALVE REPAIR (CONT)
INSTALL two shims (13), four new packings
(14), and swing section VALVE (15).
INSTALL two shims (16), four new packings
(17), and intake MANIFOLD (18).
B e f o r e tightening nuts, be sure
equal amount of threads are
exposed on both ends of rods.
INSTALL four NUTS (19) on four rods (2).
TIGHTEN eight NUTS (1 and 19) to 20-30
Ib-ft (27-41 Nm).
Install backhoe control valve (page