 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
TILT AND LATCH CONTROL VALVE REPAIR (CONT)
NOTE
Procedure is the same for both tilt
and latch control valve sections.
14.
REMOVE and DISCARD four PACKINGS (24).
15.
REMOVE two cotter pins (25), two pins (26),
and BRACKET (27). DISCARD cotter PINS.
16.
LOOSEN NUT (28) and REMOVE PIVOT (29).
17.
REMOVE two screws (30) and RETAINER
(31).
18.
REMOVE SPOOL (32) from valve body (33).
19.
REMOVE and DISCARD two PACKINGS (34
and 35) from valve body (33).
20. REMOVE spool END (36) from spool (32).
WARNING
Assembly is spring loaded.
W e a r safety goggles. Failure to
d o so could result in injury to
personnel.
21. USING spring compression TOOL, completely
C O M P R E S S SPRING (37) and REMOVE
END (38).
22. CAREFULLY RELEASE TENSION on spring
(37) and REMOVE spring compression TOOL.
23. REMOVE guide (39), SPRING (37), and guide
(40).
20-35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals