Table 1. Worksheet for Spacer, Bearing, and Washer Thickness

TM 5-2420-224-34

AXLE REPAIR (CONT)

Table 1. Worksheet for Spacer, Bearing, and Washer Thickness

EXPLANATIONS (dimensions in mm)

Etched in center axle housing (1)

e.g., 0.35 in. (0.90 mm)

Stamped in axle tube at lock side (2)

e.g., 1.30 in. (33.15 mm)

C Overall height of large taper roller bearing race, measured

on a surface plate

e.g., 1.14 in. (29.00 mm)

Etched in ring gear (3)

e.g. 3.02 in. (76.90 mm)

Measurement from collar of inner bearing race to upper

edge of follower, measured with depth gage

e.g., 1.37 in. (34.80 mm)

Measurement from upper claw edge of ring gear to contact

surface of bearing at ring gear

e.g., 1.31 in. (33.40 mm)

G Measurement from end face of drive pinion to center of

differential etched in end face of drive pinion (4)

e.g., 3.39 in. (86.15 mm)

16-23