 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
AXLE REPAIR (CONT)
CAUTION
If bevel gear is replaced, pinion
shaft must also be replaced.
Make sure serial numbers are
the same to prevent damage to
equipment.
9.
INSTALL bevel GEAR (15), eight screws (16),
and eight nuts (17), observing marks on
screws. TURN HALF-AXLES (11) to accept
screws (16). TIGHTEN SCREWS to 88 Ib-ft
(120 NZm).
NOTE
All measurements are in mm.
If dimension amounts to two
places, it will be necessary to
p r e f i x dimension "A" with the
constant 74 ("A" = 74.XX).
10. CHECK DIMENSION etched on mechanical
differential HOUSING (18) and RECORD in
Table 2 (page 16-24) for A dimension.
11. CHECK DIMENSION etched on short axle
tube HOUSING (3) and RECORD in Table 2
16-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals