 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
AXLE REPAIR (CONT)
24. USING PULLERS, REMOVE bearing race
(48) and SHIM(S) (49) from short axle tube
PULLER
housing (47). Discard shim(s).
INSPECTION
NOTE
Install new ring gear, pinion, and
"&
differential housing when installing
"'
new differential gear repair kit.
PULLER
1.
Inspect housings for galling, cracks, or
"%
stripped threads.
2.
Inspect gears for cracks or missing teeth.
3.
Inspect pinion for damaged splines.
4.
Inspect disc, wheel, half-axle, axle, four
gears, and four discs for wear and damage.
ASSEMBLY
NOTE
Procedure is the same for both
front and rear axles.
!
1.
APPLY COAT of LUBRICATING OIL to new
PACKING (1) and INSTALL PACKING (1) on
piston (2).
CAUTION
Make sure slot on piston is
alined with dowel in short axle
tube housing to prevent damage
to equipment.
2.
INSTALL PISTON (2) in short axle tube
housing (3).
#
"
3.
INSTALL brass bearing (4) and FOLLOWER
(5) in short axle tube housing (3).
!
Change 1
16-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals