 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
TRANSMISSION REPAIR (CONT)
4.
INSTALL new PACKING (10) on pin (11).
!
5.
REMOVE two retaining rings (12), two
"
bearing cups (13), two BEARINGS (14), and
"
#
ring (15) in front-wheel drive idler gear (16).
!
6.
INSTALL front-wheel drive idler gear (16)
assembly in housing (17).
$
7.
APPLY COAT of SEALING COMPOUND
%
INSTALL PIN (11), screw (18) and nut (19).
TIGHTEN SCREW to 36 lb-ft (49 N.m).
&
8.
APPLY COAT of SEALING COMPOUND
$
'
INSTALL PLUG.
NOTE
$
"
Install synchronizer with collar
%
facing front-wheel drive gear.
&
9.
INSTALL front-wheel drive GEAR (21),
#
%
synchronizer (22), two pins (23), and shifter
fork (24).
!
10. INSTALL new PACKING (25) in housing (17).
11. INSTALL BEARING (26) and nut (27) on
lever (28).
12. INSTALL LEVER (28) in shifter fork (24).
POSITION LEVER so half of hole in shifter
fork (24) is visible when lever (28) is in
!
!
contact with housing (17).
&
NOTE
"
Screw must pass through groove
in lever.
1 /2 H O L E IN
%
S H IF T E R F O R K
13. INSTALL SCREW (30).
15-26 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals