|
|
![]() TM 5-2420-224-34
CRANE PINION GEAR BUSHINGS REPLACEMENT (CONT)
1.
INSTALL two pinion gear BUSHINGS (1 and
2) and TOOLS in following order
Bushing (1)
(flat side facing intermediate gear)
Bushing
(flat side facing intermediate gear)
Spacer
Stud
Bushing (2)
Bushing
Cylinder
Nut
2.
T I G H T E N NUT enough to apply SLIGHT
amount of PRESSURE on two pinion gear
bushings (1 and 2).
APPLY hydraulic PRESSURE until two pinion
3.
gear BUSHINGS (1 and 2) are completely
SEATED.
4.
REMOVE TOOLS.
NOTE
Follow-on Maintenance:
I n s t a l l crane intermediate gear
I n s t a l l crane pinion gear (page
Lubricate crane pinion gear (LO 5-
2420-224-12).
12-35/(12-36
Blank)
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |