 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
AXLE THRUST TUBE REPLACEMENT (CONT)
2.
IF REMOVED, INSTALL two new PINS (3).
3.
IF REMOVED, INSTALL four new STUDS
(4).
4.
APPLY COAT of MOLYBDENUM DISUL-
FIDE GREASE to SEAL (1).
WARNING
Adhesive causes immediate
bonding on contact with eyes,
skin, or clothing and also gives
off harmful vapors.
Wear
protective goggles and use in
well-ventilated
area.
If
adhesive gets in eyes, try to
keep eyes open; flush eyes
with water for 15 minutes and
get immediate attention.
5.
APPLY COAT of SEALING COMPOUND to
mating SURFACES of thrust tube (2) and
pinion shaft assembly (5).
6.
USING GUIDE, POSITION thrust TUBE (2)
on pinion shaft assembly (5).
7.
APPLY COAT of SEALING COMPOUND to
eight BOLTS (6) and INSTALL eight BOLTS
(6). TIGHTEN BOLTS to 67 lb-ft (90 N.m).
8.
INSTALL BELLOWS (7) and two clamps (8
and 9). DO NOT TIGHTEN CLAMPS.
9.
INSTALL two HOUSINGS (10 and 11),
four nuts (12), and four lock washers (13).
10. TIGHTEN two CLAMPS (8 and 9).
11. INSTALL new HOUSING (14).
12. INSTALL FITTING (15).
Change 1
3-107
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals