 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
5-2420-224-34
EXHAUST MANIFOLD REPLACEMENT (CONT)
REMOVE two screws (11), three bolts (12),
5.
bolt (13), two BRACKETS (14), clamp (15),
and rear suspension EYE (16).
REMOVE two nuts (17), two straps (18), and
6.
exhaust MANIFOLD (19).
REMOVE and DISCARD two GASKETS (20).
INSTALLATION
CAUTION
Make sure all gasket material
h a s been removed from mating
s u r f a c e s to prevent damage to
equipment.
INSTALL two new gaskets (1) and exhaust
1.
MANIFOLD (2). INSTALL two STRAPS (3)
and two nuts (4).
2.
INSTALL BRACKET (5) and two screws (6).
INSTALL BRACKET (7), rear suspension EYE
3.
(8), and two bolts (9 and 10).
INSTALL CLAMP (11) and two bolts (12).
4.
TIGHTEN two SCREWS (6) and four BOLTS
5.
(9, 10, and 12) to 22 Ib-ft (30 N.m).
INSTALL new GASKET (13), three screws
6.
(14), and three new nuts (15).
7.
TIGHTEN three NUTS (15) to 34 Ib-ft (45
N.m).
INSTALL screening PLATE (16), two screws
8.
(17), and two new spring tension washers
(18).
INSTALL screw (19), SPACER (20), new
9.
spring tension washer (21 ), and nut (22).
NOTE
Follow-on Maintenance:
Lower cab (TM 5-2420-224-20).
3-24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals