TYPICAL PLUG CONNECTOR

TM 5-2420-224-20-1

TYPICAL PLUG CONNECTOR

Strip wire insulation approximately 1/8 in. (3 mm).

2. Crimp terminal onto wire.

Insert terminal into connector.

Section

III.

USING

STE/ICE-R

WITH

THE

TRACTOR

This section contains information on the use of Simplified Test Equipment for Internal

Combustion Engines Re-Programmable (STE/ICE-R) with the SEE/HMMH. Two types of testing are

performed: Go and No-Go. Refer to the STE/ICE Technical Manual (TM 9-4910-571-12&P) when

using STE/ICE-R.

The following are contained in this section:

Page

Pretest Inspection

........................................

Test Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Confidence Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PRETEST

INSPECTION

The daily preventive maintenance inspections and procedures must be performed on the

SEE/HMMH before performing STE/ICE-R tests.