Appendix B: COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS

TM 5-2420-224-10

APPENDIX B

COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS

Section I. INTRODUCTION

B-1. SCOPE

This appendix lists integral components of end item and basic issue items for the SEE/HMMH to help you inventory

items required for safe and efficient operation.

B-2. GENERAL

The Components of End Item and Basic Issue Items Lists are divided into the following sections:

a. Section II. COMPONENTS OF END ITEM . This listing is for informational purposes only and is not authority

to requisition replacements. These items are part of the end item but are removed and separately packaged for

transportation or shipment. As part of the end item, these items must be with the end item whenever it is issued or

transferred between property accounts. Illustrations are furnished to assist you in identifying the items.

b. Section III. BASIC ISSUE ITEMS. These are the minimum essential items required to place the SEE/HMMH

in operation, to operate it, and to perform emergency repairs. Although shipped separately packaged, BII must be with

the SEE/HMMH during operation and whenever it is transferred between property accounts. The illustrations will assist

you with hard-to-identify items. This manual is your authority to request/requisition replacement BII, based on

TOE/MTOE authorization of the end item.

B-3. EXPLANATION OF COLUMNS

The following provides an explanation of columns found in the tabular listings:

a. Column (1) - Illustration Item Number (ILLUST NUMBER).

This column indicates the number of the

illustration in which the item is shown.

b. Column (2) - NATIONAL STOCK NUMBER . Indicates the National stock number assigned to the item and will

be used for requisitioning purposes.

c. Column (3) - DESCRIPTION . Indicates the Federal item name and, if required, a minimum description to

identify and locate the item. The last line for each item indicates the Contractor And Government Entity (CAGE) code in

parentheses, followed by the part number. If the item needed differs for different models of this equipment, the model is

shown under the "USABLE ON CODE" heading in this column. These codes are identified as:

Code

Usable On

SEE

HMMH

SEE/HMMH

Column (4) - Unit of Measure (U/M ).

Indicates the measure used in performing the actual

operational/maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea, in,

pr).

e. Column (5) - Quantity Required (QTY RQR ). Indicates the quantity of the item authorized to be

used with/on the equipment.

B-1