SPARE TIRE REPLACEMENT

TM 5-2420-224-10

b. Open priming pump (1) by turning counterclockwise and lifting up.

c. Pump up and down until slight resistance is felt.

d. Unscrew front fuel filter bleeder screw (2) one or two turns.

e. Operate priming pump (1) until bubble-free fuel is observed from bleeder screw (2).

f. Tighten bleeder screw (2).

g. Repeat steps d thru f for rear fuel filter bleeder screw (2).

h. Secure priming pump (1) by pushing down and. turning clockwise.

i. Install engine hood.

3-6. SPARE TIRE REPLACEMENT

a. Removal.

WARNING

Wheel assembly weighs 170 lb (77.18 kg). Use a hoisting device or at least

two personnel to lift wheel assembly to prevent personal injury.

Remove holder (1) and wheel (2).

b. Installation.

WARNING

Wheel assembly weighs 170 lb (77.18 kg). Use a hoisting device or at least

two personnel to lift wheel assembly to prevent personal injury.

Install wheel (2) and holder (1).

3-15