|
|
TM 5-2420-224-10
STEERING
Vehicle Difficult to Steer ................................................................................................................
BRAKING
Parking Brake Cannot Be Engaged or Does Not Hold Vehicle .....................................................
ELECTRICAL
Voltmeter Indicates Unusual Battery Condition .............................................................................
Charge Indicator Light Indicates Charging Circuit Undercharging ................................................
HYDRAULIC
Hydraulic Equipment Does Not Operate Properly..........................................................................
Malfunction
Test or Inspection
Corrective Action
1.
STARTER FAILS TO CRANK ENGINE WHEN START SWITCH IS ACTIVATED.
Step 1.
Check to see if master disconnect switch is on.
Turn on master disconnect switch and fully depress clutch pedal.
Step 2.
Check to make sure ignition switch is in proper position.
Turn ignition switch to ON.
Step 3.
Check to see if battery cables are loose, broken, or corroded.
If loose, broken, or corroded, notify unit maintenance.
2.
ENGINE CRANKS BUT FAILS TO START.
Step 1.
Check to make sure hand throttle is in idle position.
Place hand throttle in idle position.
Step 2.
Visually check fuel level in tank.
Fill as required (refer to page 2-49).
Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |