REPOSITION FRONT BLACKOUT LIGHT FOR BLACKOUT OPERATIONS (SEE)

TM 5-2420-224-10

2-14.

REPOSITION FRONT BLACKOUT LIGHT FOR BLACKOUT OPERATIONS (SEE)

WARNING

Do not connect or disconnect any electrical connector unless vehicle MASTER switch is

OFF. To do so could result in serious personal injury.

CAUTION

Blackout light assembly must be relocated back to fender prior to operating front loader.

Failure to do so will result in damage to blackout light assembly.

NOTE

It is necessary to move blackout light assembly during convoy operations only.

a. Relocate Blackout Light Assembly From Front Fender to Front Loader.

(1) Disconnect cable (1) from blackout light assembly (2).

(2) Remove nut (3), lock washer (4), ground wire (5), and blackout light assembly (2) from bracket (6).