Stopping the Vehicle.

TM 5-2420-224-10

(1)

Position 0 is two-wheel drive (rear axle).

NOTE

System air pressure must be maintained above 90 psi before selecting four-wheel

drive and four-wheel drive with differential lock.

(2)

Shifting into four-wheel drive (position I) is effected by means of a control cylinder on the

transmission.

(3)

The differential locks on both axles are added (position II). The four-wheel drive and the differential

locks can be engaged and disengaged while driving, without disengaging the clutch, if the wheels

are not spinning and have contact with solid ground.

Stopping the Vehicle.

(1)

Depress the clutch pedal (1).