|
| |
TM 5-2420-222-34
3-8.
CRANKSHAFT MAINTENANCE (Con’t).
14. Position connecting rod bearing cap (5) and assembled lower sleeve bearing half (4) in place on connecting rod (11)
and crankshaft (14).
15. Coat threads of two bolts (7) with engine oil. Install two bolts and washers (6) in connecting rod bearing cap (5) and
connecting rod (11). Torque bolts to 65 lb.-ft. (88 N•m).
16. Remove screw (15) from end of crankshaft (14).
FOLLOW-ON TASKS:
•
Install cylinder block plate (see paragraph 3-7).
•
Install fuel injection nozzles (see TM 5-2420-222-20).
•
Install flywheel housing (see paragraph 3-10).T
•
Install engine oil pan (see paragraph 3-20).
•
Install engine assembly (see paragraph 3-3).
TA701258
3-58
|
