|
| |
TM 5-2420-222-34
3-7.
CYLINDER BLOCK PLATE REPLACEMENT (Con’t).
2.
Inspect cylinder block plate for cracks, breaks, and abnormal bends.
3.
Inspect five setscrews (3) for cracks, bends, or damaged threads. If damaged, remove setscrews .
4.
Inspect threaded holes in cylinder block plate for damaged threads. Restore damaged threads using screw
threading set.
c.
INSTALLATION
1.
Position cylinder block plate (6) and new gasket (2) in place on engine block (1).
2.
Install five machine screws (5) and new lockwashers (4) in cylinder block plate (6) and engine block (1). Torque
machine screws to 25 lb.-ft. (34 N-m)
FOLLOW-ON TASKS:
•
Install fuel metering pump (see paragraph 5-2).
•
Install control cams (see paragraph 3-19).
•
Install camshaft (see paragraph 3-17).
•
Install idler gears (see paragraph 3-15).
•
Install fuel pump helical gear (see paragraph 5-3).
3-43
|
