|
| |
TM 5-2420-222-34
3-7.
CYLINDER BLOCK PLATE REPLACEMENT (Con’t).
a.
REMOVAL
1.
Remove five machine screws (5) and lockwashers (4) from cylinder block plate (6) and engine block (1). Discard
lockwashers.
2.
Lift cylinder block plate (6) and gasket (2) off engine block (1). Discard gasket.
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point is 100°F-138°F (38°C-59"C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean cylinder block plate with dry cleaning solvent and a clean rag. Remove any remaining gasket material from
cylinder block plate and engine block.
TA701247
3-42
|
