|
| |
TM 5-2420-222-34
14-6.
HYDRAULIC PUMP STROKE CONTROL VALVE REPAIR (Con’t).
c.
ASSEMBLY
NOTE
Coat all preformed packings with hydraulic fluid as they
are assembled.
1.
Install new preformed packings (4 and 6) on drain plug (5) and plug
(7).
2.
Install drain plug (5) and plug (7) in control valve body (3).
3.
Install new preformed packing (27) in control valve body (3).
4.
Install new preformed packing (29) on sleeve bushing (28). Install
sleeve bushing in control valve body (3).
5.
Install hydraulic pump stroke control valve filter element (see TM 5-
2420-222-20).
6.
Install two new preformed packings (1) on two plugs (2). Install plugs
in control valve body (3).
TA701568
14-35
|
