|
| |
TM 5-2420-222-34
3-3.
ENGINE ASSEMBLY REPLACEMENT (Con’t).
7.
With two assistants, lower lifting device until engine assembly (39) is alined with reverser housing (3). Move lifting
device rearward until engine assembly engages reverser housing.
8.
Install two screws (47), new lockwashers (53), washers (48), and nuts (52) in left and right brackets (46).
9.
Install two screws (56) and new lockwashers (55) in engine oil pan, flywheel housing (30) and reverser housing (3).
Torque screws to 250 lb.-ft. (339 Nom).
10. Install four screws (50) and washers (51) in flywheel housing (30) and reverser housing (3). Torque screws to 250 lb.-
ft. (339 N•m).
11. Position wood block under engine assembly (39). Remove lifting device, engine and transmission sling (37), and three
eyebolts (36) from engine assembly.
TA701231
3-16
|
