|
| |
TM 5-2420-222-34
14-2.
ACCUMULATOR ASSEMBLY MAINTENANCE (Con’t).
3.
Coat new preformed packing (27) and new ring spacer (28) with hydraulic fluid. Install on end cap (5).
4.
Slide end cap (5) with assembled parts in hydraulic cylinder (8) until retaining ring groove is visible.
5.
Using retaining ring pliers, install retaining ring (29) in hydraulic cylinder (8) and against end cap (5).
6.
Coat two new packing retainers (33), new preformed packings (31), and new packing retainer (30) with hydraulic
fluid and install on piston (32).
7.
Slide piston (32) with assembled parts in hydraulic cylinder (8) with open end facing fluid side of hydraulic cylinder.
8.
Install spring (18) and fluid restrictor (17) in cap (10).
9.
Coat new ring spacer (20) and new preformed packing (21) with hydraulic fluid. Install on cap (10).
10.
Slide cap (10) with assembled parts in hydraulic cylinder (8) until retaining ring groove Is visible.
11.
Using retaining ring pliers install retaining ring (19) in hydraulic cylinder (8) an d against cap (10).
TA701547
14-11
|
