|
| |
TM 5-2420-222-34
13-6.
FENDERS AND SUPPORTS MAINTENANCE (Con’t).
e.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Lifting device Is required when
parts weigh over 50 lb. (23 kg) for a single person lift, over 100 lb. (45 kg) for a two
person lift, and over 150 lb. (68 kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may
cause serious Injury or death to personnel.
NOTE
Loader backhoes with serial numbers 235786-235999 have a canopy. Loader
backhoes 319995-342573 have a roll-over protective structure (ROPS).
1.
Install fender brace (5) on fender (1) and canopy or ROPS (6).
2.
Install two screws (7), washers (4), new lockwashers (3), and nuts (2) in fender brace (5) and canopy or ROPS (6).
3.
Using lifting device, raise and position fender (1) and assembled parts on fender brace (5) and canopy or ROPS
(6).
NOTE
If installing left fender, skip steps 4 and 5.
4.
Install five bolts (19), new lockwashers (20), and nuts (21) in control box (18) and fender (1).
5.
Install bolt (17), new lockwasher (23), and nut (22) in control box (18), throttle lever bracket (24), and fender (1).
TA701539
13-42
|
