|
| |
TM 5-2420-222-34
13-6.
FENDERS AND SUPPORTS MAINTENANCE (Con’t).
5.
Position lampholder (35) in place on fender (1) and secure with six capscrews (48).
NOTE
If assembling right fender, skip steps 6 through 8.
6.
Position handle (38) in place on fender (1) and secure with two capscrews (36) and four washers (37).
7.
Position structural frame (16) in place on fender (1) and secure with two capscrews (39), washers (47), new
lockwashers (46), and nuts (45).
8.
Position step (41) in place on fender (1) and secure with four capscrews (40), washers (42), new lockwashers
(43), and nuts (44).
TA701537
13-40
|
