|
| |
TM 5-2420-222-34
13-6.
FENDERS AND SUPPORTS MAINTENANCE (Con’t).
4.
Inspect fender for damaged threads. Restore damaged threads using screw threading set.
5.
Inspect liner section for cracks, rips, tears, and crumbling.
d.
ASSEMBLY
NOTE
Perform steps 1 and 2 only on loader backhoes with serial numbers 319995-342573,
If liner section was removed.
1.
Apply metal bonding adhesive In Y in. (3.18 mm) wide beads in 2 in. (50.80 mm) or smaller squares on liner
section (49). Ensure that outside bead has no gaps and is within 1/4 in. (6.35 mm) from edge of liner section.
2.
Press liner section (49) in place on fender (1), then remove and allow adhesive to set for two minutes. Aline liner
section with fender and press firmly in place.
3.
Press button plug (28) in place in fender (1).
NOTE
If assembling left fender, skip step 4.
4.
Position bracket (27) in place on fender (1) and secure with two capscrews (30), washers (31), new lockwashers
(26), and nuts (25).
TA701536
13-39
|
