|
| |
TM 5-2420-222-34
13-5.
COWL SUPPORT MAINTENANCE (Con’t).
3.
Install two screws (28), new lockwashers (27), and sleeve spacers (26) in cowl support (7) and reverser housing
4.
Position speed control shaft rod (24) in shaft (21) and secure with washer (23) and new cotter pin (22). (25).
5.
Position angle bracket (11) on cowl support (7) and steering column (16) and secure with two screws (12), new
lockwashers (10), and nuts (20).
6.
Install U-bolt (17), two washers (15), new lockwashers (14), and nuts (13) on steering column (16) and angle bracket.
TA701528
13-30
|
