|
| |
TM5-2420-222-34
13-4.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY REAR MOUNTS MAINTENANCE (Con’t).
a.
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Lifting device Is required when
parts weigh over 50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two
person lift, and over 150 lb (68 kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may
cause serious Injury or death to personnel.
1.
Using floor jack, raise backhoe main frame (1) until tension is relieved on two pins (3).
2.
Remove capscrew (4), nut (5), and pin (3) from left and right towbar (2) and backhoe main frame (1).
3.
Raise and secure left and right towbar (2) to side frames (6).
4.
Using lifting device, support canopy or ROPS (7).
5.
Remove four capscrews (18), washers (17), lockwashers (16), and front crossmember (15) from canopy or ROPS
(7). Discard lockwashers.
6.
Remove two nuts (14), lockwashers (13), washers (12), lower front mounts (11), and screws (8) from canopy or
ROPS (7) and special brackets (10). Discard lockwashers.
TA701515
13-14
|
