|
| |
TM5-2420-222-34
13-4.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY REAR MOUNTS MAINTENANCE.
This Task Covers:
a.
Removal
d.
Repair
b.
Disassembly
e.
Assembly
c.
Cleaning and Inspection
f.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Rear wheels removed (see TM 5-2420-222-20).
•
Metal bonding adhesive (Item 1, Appendix B)
•
Fenders and supports removed (see para-
•
Detergent (Item 13, Appendix B)
graph 13-6).
•
Rags (Item 28, Appendix B)
•
Warning lights removed (see TM 5-2420-222-20).
•
Dry cleaning solvent (Item 31, Appendix B)
•
Center platform removed (see TM 5-2420-222-20).
•
Lacing and tying tape (Item 37, Appendix B)
•
Center platform support removed (see TM 5-
•
Twenty lockwashers
•
Loader backhoe control guards removed (see TM 5- Personnel Required: Two
2420-222-20)
General Safety Instructions:
Tools/Test Equipment:
•
Dry cleaning solvent is flammable and must not be
•
General mechanic's tool kit
used near open flame. Use only in a well-ventilated
•
Field automotive shop set
area.
NOTE
Loader backhoes with serial numbers 235786-235999 have a canopy. Loader
backhoes with serial numbers 319995-342573 have a roll-over protective structure
(ROPS).
13-13
|
