|
| |
TM 5-2420-222-34
9-3.
REAR AXLE HOUSING, SHAFTS, SEALS, BEARINGS, AND PLANETARY PINION CARRIER MAINTENANCE
(Con’t).
35. Install elbow (24) and new preformed packing (23) in
connector (22).
36. Install hydraulic bleeder valve (20) and cap (19) in
rear axle housing (1). Press cap closed on hydraulic
bleeder valve.
f.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts.
Lifting device Is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb
(45 kg) for a two person lift, and over 150 lb (68
kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device.
Failure to follow this warning may cause serious
Injury or death to personnel.
1.
Install two new preformed packings (13 and 14) or
brake pressure plate (12). Coat preformed packings
with grease.
2.
Install brake pressure plate (12) with assembled
parts in rear axle housing (1).
TA701450
9-24
|
