|
| |
TM 5-2420-222-34
9-3.
REAR AXLE HOUSING, SHAFTS, SEALS, BEARINGS, AND PLANETARY PINION CARRIER MAINTENANCE
(Con’t).
CAUTION
Do not remove oil seal cup, bearing cups, and straight pins from rear axle housing,
or roller bearing and oil seal from axle shaft, unless damaged. Removal may
damage parts.
15. Using mechanical gear and bearing puller kit, remove oil seal cup (38) from rear axle housing (1).
16. Using mechanical gear and bearing puller kit, remove bearing cup (40) from rear axle housing (1).
17. Using mechanical gear and bearing puller kit, remove bearing cup (43) from rear axle housing (1).
18. Using mechanical gear and bearing puller kit, remove roller bearing (39) from axle shaft (15).
19. Using mechanical gear and bearing puller kit, remove oil seal (37) from axle shaft (15).
20. Remove three straight pins (44) from rear axle housing (1).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-59°C). If you
become dizzy while using cleaning solvent, Immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
TA701445
9-18
|
